Skymovo
Install guide

Install at home. Connect when you land.

Use the QR code, a one-tap install link, or manual SM-DP+ details from your Skymovo order. This guide walks through iPhone and Android without the Airalo app.

Three ways to install

  • QR code

    Scan from another screen. Works on nearly every eSIM phone.

  • One-tap link

    Install on iPhone or Android from the button on your order page.

  • Manual codes

    Enter SM-DP+ and activation code if scanning isn’t an option.

Before you start

A two-minute checklist

Skip these and the install often fails for reasons that have nothing to do with Skymovo.

  • eSIM-ready and unlocked

    Dial *#06# and look for an EID. Your phone must also be network-unlocked. If either check fails, fix that before you buy.

  • Stable Wi-Fi

    Install at home or anywhere with solid Wi-Fi. Cellular data is a poor substitute for downloading the profile.

  • Your order details

    Open Order history on another screen or device. You’ll need the QR code, or the SM-DP+ address and activation code.

Your codes

Find the QR on your order

Skymovo doesn’t use a separate carrier app for install. Everything you need lives on the order detail page after you buy.

Go to order history
  1. 1

    Log in to Skymovo and open Order history from your account menu.

  2. 2

    Tap the order for this trip.

  3. 3

    Use Install on iPhone / Install on Android, scan the QR code, or copy the SM-DP+ and activation code for a manual install.

Step by step

Install and connect

Pick your phone. Follow install first, then the landing steps when you’re in coverage.

Install with QR code

  1. 1On the iPhone you’ll travel with, open Settings → Cellular (or Mobile Service).
  2. 2Tap Add eSIM → Use QR Code.
  3. 3Scan the QR from your Skymovo order (show it on another device, or print it).
  4. 4Tap Continue and wait. Don’t leave Settings until it finishes — it can take a minute or two.
  5. 5When asked, label the line “Skymovo travel”. Keep your home line for calls and texts.
  6. 6Leave the Skymovo line off until you land, unless you’re already in coverage and ready to start the plan.

Install with one-tap link

  1. 1On the iPhone you’ll travel with, open your Skymovo order and tap Install on iPhone.
  2. 2Confirm the prompt to add the cellular plan. Stay on Wi-Fi until it finishes.
  3. 3Label the line “Skymovo travel” and keep your home line for calls and texts.
  4. 4Needs iOS 17.4 or newer. If the link doesn’t open the install flow, use the QR method instead.

Install manually

  1. 1Open Settings → Cellular → Add eSIM → Enter Details Manually.
  2. 2Enter the SM-DP+ Address and Activation Code exactly as shown on your order.
  3. 3Leave Confirmation Code blank unless your order shows one.
  4. 4Continue, wait for activation, then label the line “Skymovo travel”.

When you land

  1. 1After you land, open Settings → Cellular.
  2. 2Turn on the Skymovo travel line.
  3. 3Set Cellular Data to Skymovo travel.
  4. 4Open that line and turn Data Roaming on.
  5. 5Turn off Allow Cellular Data Switching so the phone doesn’t jump back to your home line.
  6. 6If there’s still no data, toggle Airplane Mode for ten seconds, or pick the network listed on your order under Network Selection.
Common questions

Install FAQs

Still stuck? Help center or contact us with your order code.

Ready for the next trip?

Pick a plan, install on Wi-Fi, and keep the guide bookmarked for landing day.